have extra
anchoring security for boat and crew,
lessen
the risk of dragging anchors and
have much
more comfort on board in windy conditions
with this proven anchoring
technique - Anchor Buddy anchor
weight
"A Sentinel (kellet)
is a weight typically around 25-30lb suspended
from the rode to help keep the pull on the
anchor as horizontally as possible to prevent
dragging in rough weather"
Charles F Chapman's Boater's
Bible, "Piloting, Seamanship
and Small Boat
Handling"
Feel
safe when it blows
Change
the angle of pull on the
anchor to help it dig in
Reduce
the working load on your
anchor by up to 50%
(*ref)
for
added security, by acting as a
spring or shock absorber (read
how)
Reduce
boat swing considerably, this
can lead to the anchor rolling
out
Dampen
all excessive boat movement at
anchor for more comfort on
board
When
the holding power of your anchor
is in question, you can set two
anchors from the dinghy, attach
and lower your dive belt or any
other heavy weight -boat
owners have done that for
generations. The
principle is exactly the same but why do that when your
Anchor Buddy anchor weight can be twisted on in less
than a minute - no tools
required?
TIP! slowly reverse to stretch out rope or chain, to make it easier to put Anchor Buddy on!
More details
here
we
sell through distributors
worldwide, but if you live in the USA
or Australia,
we sell direct to you and deliver
by DHL Worldwide right to
your door
considered
"ESSENTIAL
if anchoring in
coral"
A 2000 year old idea,
the Anchor Buddy anchor weight is a purpose-designed,
modern version of a proven anchoring system that has been used for
generations
"You
make a great product! I
tried a friends this past
weekend and was very
impressed with the
results! You should market
more in the USA" Manny
Mendez, Florida, USA
"totally amazing in
all conditions and at all
times; light winds or
heavy weather and so easy
to put on and off. The
advantages it gave to our
comfort on board and the
reduction in our swing
circle were so good that
we would use it all the
time whether we needed it
or not" Keith Eade, designer Chico
Yachts, plus sailor of
over 130,000 sea miles
Anchor Buddy anchor weights
proudly made in New Zealand
since 1995
Garhauer
Marine NZ Ltd·
PO Box 317 · Kowhai Crescent, Paihia · Bay of Islands ·
New Zealand
Phone:+64 9 402-6231 · Fax:+64 9 402-6245
Email
Copyright 2003
Garhauer Marine NZ Ltd - All rights reserved